Causes of Rising Terminal Temperature

Terminal Block is used to achieve the electrical connection of an accessory product, industry is divided into the category of connectors. With the industrial automation degree more and more high and industrial control requirements more and more strict, precise, the amount of terminal blocks gradually rise. With the development of the electronics industry, the use of terminal blocks more and more, and more and more types.

Terminal Block

Today the Terminal Block Supplier to tell you about the causes of the temperature rise of the terminal, the following aspects of the information only for your reference:.

First of all, the voltage is too high. Can be checked from the source, the transformer secondary voltage - voltage in the distribution box - each power equipment voltage. Sockets can also have assembly buckle and locking buckle. The assembly fastener can serve to fix more firmly to the PCB board, and the locking fastener can lock the mother and socket after the installation is completed. A variety of socket designs are available with different insertion methods for the masters, e.g., horizontal, vertical or angled towards the PCB. Both metric and standard wire gauges can be selected.

Secondly ground fault. You can also check from the transformer there, and then to the distribution box grounding. The grounding to be grounded, while the normal phase line should exclude grounding faults. You can use insulation table or shaking table to measure when the power is off, segmentation measurement, try to measure only segmentation of cables, wires, circuit breakers, switches and other power supply and distribution lines, it is difficult to segment the case, then pull the fuse of the weak power equipment, sensing equipment.

If you are interested in our products or have any questions, you can directly give us a message or contact us directly, in addition the company also provides Brass Terminals Block, if you need, please feel free to contact us!