Uses and Advantages of Copper Wiring

In order to ensure reliable and convenient wiring in electrical circuits, use special crimping pliers to connect the Brass Terminal with the wire at the end of the wire. Generally, RNB type or DATG type is commonly used; for example, RNB2.5-5 is a 2.5-square wire, the screw is 5mm, and other models are analogous.

Terminal block is a kind of accessory product used to realize electrical connection, which is divided into the category of Busbar Connector in industry.

1. The Terminal Block is used to facilitate the connection of wires. It is actually a piece of metal enclosed in insulating plastic. There are holes at both ends for the wire to be inserted, and there are screws for fastening or loosening.

2. For example, two wires need to be connected sometimes, and sometimes they need to be disconnected. At this time, they can be connected with terminals and disconnected at any time without welding or twisting them together, which is very convenient and quick. And it is suitable for a large number of wire interconnections. In the electric power industry, there are special terminal blocks and terminal boxes, which are all connected terminals, single-layer, double-layer, current, voltage, ordinary, breakable, etc. A certain crimping area is to ensure reliable contact and to ensure that sufficient current can pass.

Brass Terminal

advantage:

1. The brass terminal block is very convenient and can easily achieve chain bridging in accordance with actual requirements

2. When the wire connection position is closely adjacent, it can improve the insulation safety and prevent the wire from branching

3. Make it easier for the wire to be inserted into the end.